引用
引用第16樓zyfzxh于2013-12-14 12:39發表的 :
恭喜你，已找到問題點，你需要安裝GX Configurator DP 7.08J及以上版本就可以解決此問題
下面是手冊上面的說明。。。。。。。。。哎。。。悲劇了啊。。。。。。要求必須安裝7.08J后才能由GX WORKS2掛上。。。。。。。。。。。。。。。。三菱的軟件真心惡心。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。
Software InstallationInstalling for GX Works2 IntegrationGXWorks2 must be installed before GXConfigurator-DP is installed in order to create the correctsystem settings.The following list of installation scenarios describes the effects on the use of the integrated GXConfigurator-DP within GXWorks2.1. CaseGXConfigurator-DP 7.08J is installed at firstGXWorks2 version 1.87R or newer is installed after GXConfigurator-DP--> The integrated behaviour of GXConfigurator-DP is not enabled. The installer cannot addPROFIBUS DP modules to the Intelligent Function Module selection dialog of GXWorks2.2. CaseGXWorks2 version 1.87R or newer is installedGXConfigurator-DP 7.08J is installed.GXConfigurator-DP 7.08J is de-installedGXConfigurator-DP 7.07H is installed--> If GXConfigurator-DP 7.08J is de-installed, the PROFIBUS DP modules are removed from theIntelligent Function Module selection dialog of GXWorks2. If GXConfigurator-DP 7.07H is installed,the PROFIBUS DP modules in the Intelligent Function Module selection dialog of GXWorks2 are notavailable. The integrated behaviour of GXConfigurator-DP is not available.
滬公網安備31010802001143號
