Load project from chip card
Procedure:
1. Insert the chip card containing the current project into the card slot on the base unit.
2.Switch on the supply voltage. The LC display shows the project name, CRC sum and
the date the project was created. Please check this information.
3.Load the project by pressing the rotary knob. For the project to be downloaded, the
rotary knob must be held down for between 3 and 8 seconds. Once the project has
been successfully downloaded, the status of the inputs and outputs will be shown on
the display.
滬公網(wǎng)安備31010802001143號(hào)
